The new Quinn II C-More mount turns your C-More 90 degrees and places it so close to the slide you will be able to switch back forth from limited and production with very little change in your index. You will need the "Slide Ride" version of the C-More scope to work with this mount. The mount will work on most including the “Shorty” and “Hybrid” barrels. You need a rearward mount for both of those type or you will have issues with blast eating your C-More lens. As you can see by the slot in the bottom of the mount; all adjustments can be made without removing the slide or the use of “special tools.” Since the mount is on its’ side, windage becomes elevation and visa versa. This makes the mount as easy to sight as a standard mount. The ejection port is completely clear which makes tuning the ejection much easier because you don’t have the mount hanging over the ejection port. This allows you to run mixed head stamp brass. The mount comes with a C-More plus two mounting hole configuration. Meaning it has the three standard C-More holes plus two more spaced the same distance as the others. Five Stainless Steel mounting screws will be included, but they will have to be ground flush to make sure they don’t contact the slide. Warranty: 1 year from date of purchase.